Tree Protection Zone Calculator: NRZ, SRZ and Encroachment
Work out a tree’s Notional Root Zone (NRZ) and Structural Root Zone (SRZ), then test how much of the NRZ a proposed building, driveway or service trench would take up. Calculations follow the method in AS 4970-2025 Protection of trees on development sites. New to the 2025 standard? Read our guide to AS 4970-2025
- NRZ radius
- NRZ area
- SRZ radius
- Encroachment
How the calculator works
Notional Root Zone (NRZ)
The NRZ is the area around a tree that needs protecting during development so the tree stays viable. Its radius is twelve times the stem diameter at 1.4 m, with a minimum of 2 m and a maximum of 15 m.
NRZ radius (m) = DSH (m) × 12
For multi-stemmed trees, the stems are combined into a single equivalent diameter: the square root of the sum of each stem diameter squared.
Structural Root Zone (SRZ)
The SRZ is the area holding the woody roots that keep the tree upright. Works within it carry a real risk of destabilising the tree. Its radius uses the diameter just above the root buttress, with a minimum of 1.5 m.
SRZ radius (m) = (D × 50)0.42 × 0.64, where D is in metres
Encroachment
Encroachment is the part of the NRZ taken up by proposed works. The calculator expresses it as a percentage of the NRZ area. An encroachment of up to and including 10% of the NRZ is minor. More than 10% and up to and including 20% is moderate, and more than 20% is major. For moderate and major encroachments, a Project Arborist needs to assess whether the tree will remain viable, which may involve non-destructive root investigation. Any works within the SRZ are treated as a major encroachment, whatever the percentage.
The straight-edge option calculates the area of the circle cut off by a straight line. Where the works are irregular, or several items encroach, measure the combined area on the plans and use the area option.
Common questions
Is the NRZ the same as the Tree Protection Zone?
The NRZ is the calculated starting point. The Tree Protection Zone (TPZ) is the area actually protected on site, which a Project Arborist may vary from the NRZ where the tree’s root distribution, site conditions or design justify it.
Does a minor encroachment mean the works are approved?
No. Approval rests with the local government or other assessment manager, and their planning scheme and conditions apply. A minor result simply indicates the encroachment is less likely to need detailed justification.
Does this work for palms?
Palms, cycads and tree ferns have different root systems and are treated differently. Ask a consulting arborist for guidance on these species.
What if the encroachment is major?
The design may still proceed, but the tree’s tolerance needs to be assessed and demonstrated. This usually forms part of an Arboricultural Impact Assessment (AIA) and Tree Protection Management Plan (TPMP).
This calculator provides indicative figures only. It does not replace an assessment of the tree on site by a qualified consulting arborist, and it is not an Arborist Report. Results should be confirmed against AS 4970-2025 and the requirements of the relevant local government. Arbor Australis Consulting accepts no liability for decisions made on the basis of these figures alone.